01
PICKLED
Steelco Gujarat Limited · Est. 1989
Engineered for
Engineered for
Excellence.
Cold-rolled, galvanised and colour-coated precision flat steel — engineered at Palej, Bharuch and shipped to 45+ countries worldwide.
Forged on discipline.
Built for generations.
Steelco Gujarat Limited is a BSE-listed steel manufacturer headquartered in Vadodara, with its plant at Palej, Bharuch.
Since incorporation in 1989, the company has focused on producing high-quality flat steel products with consistency, operational efficiency and transparent business practices.
Learn More About Steelco
Equipment & Capabilities
Engineering Strength.
Engineering Strength.
Building Possibilities.
State-of-the-art equipment. Integrated operations. Delivering performance that empowers industries and builds a better tomorrow.
Explore Our Equipment
Products
Five flat-steel grades
Five flat-steel grades
Engineered for the buyer.
02
FULL HARD
03
ANNEALED
04
ZINC
05
COLOUR COATED
SCROLL · DRAG · SWIPE TO BROWSE GRADES
Industries Served
Four Industries. One Steel Standard.
From rooftops and highways to assembly lines and heavy engineering — Steelco flat steel is at work across the sectors that build India.
Explore Industries Served
Sustainability at Steelco
Building a better tomorrow.
Through responsible practices, strong governance and lasting impact on people and planet.
Learn More About SustainabilitySpecifications & range
Thickness
0.15 – 0.70mm
Width
750 – 1250mm
Finish
Matte · Semi-gloss · High-glossTop coat ≤ 15µ · Back ≤ 10µ
Coating
Z80 – Z275GSM · g/m²
RAL Colour
All 205 RAL Classic shades. Search a code or browse.
+
RALclear
RAL 2008Bright red orange
Request a quotation
Click to configure.
Our team replies with the best offer.
Our team replies with the best offer.
Metallic coating
Thickness (mm)
0.50mm
0.150.70
Coil width (mm)
1000mm
750900100012201250
Paint system
PESMPPVDFUnicoat
Surface finish
MatteSemi-glossHigh-gloss
Colour — tints the coil
Quantity (MT)
40MT
40 MT1000 MT
Contact details
Request sent
PPGI · Z275 · 0.50×1000 mm · Matte · RAL 5010 · 40 MT
Our team will get back to you within 24 hours with the best offer.
Mechanical and chemical properties of the substrate grades behind every PPGI coil.
Mechanical Properties (CRCA)
5 GRADES · 3 PARAMETERS
+
| Grade | Quality | Yield Strength Max (MPa) | Tensile Strength (MPa) | Elongation % Min |
|---|---|---|---|---|
| CR1 | Commercial Quality (O) | 280 | 270–410 | 28 |
| CR2 | Drawing Quality (D) | 280 | 270–410 | 32 |
| CR3 | Deep Drawing Quality (DD) | 240 | 270–390 | 36 |
| CR4 | Extra Deep Drawing Quality (EDD) | 220 | 270–370 | 38 |
| CR5 | IF (EDD–IF) | 200 | 270–350 | 40 |
All values are typical and for reference only.
Chemical Properties (CRCA)
5 GRADES · 4 PARAMETERS
+
| Grade | Quality | C (%) Max | Mn (%) Max | Si | P |
|---|---|---|---|---|---|
| CR1 | Commercial Quality (O) | 0.15 | 0.6 | 0.04 | 0.05 |
| CR2 | Drawing Quality (D) | 0.12 | 0.6 | 0.03 | 0.4 |
| CR3 | Deep Drawing Quality (DD) | 0.1 | 0.45 | 0.03 | 0.03 |
| CR4 | Extra Deep Drawing Quality (EDD) | 0.08 | 0.4 | 0.02 | 0.03 |
| CR5 | IF (EDD–IF) | 0.02 | 0.25 | 0.01 | 0.025 |
All values are typical and for reference only.
Mechanical Properties (CRFH)
6 GRADES · 4 PARAMETERS
+
| Grade | Quality | Yield Strength Max (MPa) | Tensile Strength (MPa) | Elongation (%) | Hardness (HRB) |
|---|---|---|---|---|---|
| CR0 | Ordinary | 550–800 | 600–900 | 1–4% | 85–100 |
| CR1 | Commercial Quality (O) | 500–750 | 550–850 | 1–5% | 80–95 |
| CR2 | Drawing Quality (D) | 590–800 | 600–900 | 1–4% | 85–98 |
| CR3 | Deep Drawing Quality (DD) | 600–850 | 650–950 | 1–3% | 85–100 |
| CR4 | Extra Deep Drawing Quality (EDD) | 650–900 | 700–1000 | 1–3% | 85–100 |
| CR5 | IF (EDD–IF) | 650–950 | 700–1050 | 1–3% | 85–100 |
All values are typical and for reference only.
Chemical Properties (CRFH)
6 GRADES · 4 PARAMETERS
+
| Grade | Quality | C (%) Max | Mn (%) Max | P | Si |
|---|---|---|---|---|---|
| CR0 | Ordinary | 0.25 | 1.7 | 0.05 | 0.05 |
| CR1 | Commercial Quality (O) | 0.15 | 0.6 | 0.05 | 0.04 |
| CR2 | Drawing Quality (D) | 0.12 | 0.5 | 0.4 | 0.03 |
| CR3 | Deep Drawing Quality (DD) | 0.1 | 0.45 | 0.03 | 0.03 |
| CR4 | Extra Deep Drawing Quality (EDD) | 0.08 | 0.4 | 0.03 | 0.02 |
| CR5 | IF (EDD–IF) | 0.04 | 0.35 | 0.025 | 0.01 |
All values are typical and for reference only.
Mechanical Properties (HRPO)
6 GRADES · 5 PARAMETERS
+
| Grade | Thickness (mm) | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) | Hardness (HRB) |
|---|---|---|---|---|---|
| CR0 | 1.60 – 2.00 | 260 – 340 | 410 – 500 | 22 – 28 | 65 – 75 |
| CR0 | 2.10 – 3.00 | 250 – 330 | 400 – 490 | 24 – 30 | 63 – 73 |
| CR0 | 3.10 – 4.00 | 240 – 320 | 390 – 480 | 25 – 32 | 62 – 72 |
| CR0 | 4.10 – 6.00 | 230 – 310 | 380 – 470 | 26 – 34 | 60 – 70 |
| CR1 | 1.60 – 2.00 | 240 – 320 | 380 – 470 | 26 – 32 | 60 – 70 |
| CR1 | 2.10 – 3.00 | 230 – 310 | 370 – 460 | 28 – 34 | 58 – 68 |
| CR1 | 3.10 – 4.00 | 220 – 300 | 360 – 450 | 30 – 36 | 56 – 66 |
| CR1 | 4.10 – 6.00 | 210 – 290 | 350 – 440 | 32 – 38 | 55 – 65 |
| CR2 | 1.60 – 2.00 | 220 – 300 | 360 – 450 | 30 – 36 | 55 – 65 |
| CR2 | 2.10 – 3.00 | 210 – 290 | 350 – 440 | 32 – 38 | 54 – 64 |
| CR2 | 3.10 – 4.00 | 200 – 280 | 340 – 430 | 34 – 40 | 53 – 63 |
| CR2 | 4.10 – 6.00 | 190 – 270 | 330 – 430 | 35 – 42 | 52 – 62 |
| CR3 | 1.60 – 2.00 | 200 – 280 | 340 – 430 | 34 – 40 | 52 – 62 |
| CR3 | 2.10 – 3.00 | 190 – 270 | 330 – 420 | 36 – 42 | 50 – 60 |
| CR3 | 3.10 – 4.00 | 180 – 260 | 320 – 410 | 38 – 44 | 48 – 58 |
| CR3 | 4.10 – 6.00 | 170 – 250 | 310 – 400 | 40 – 46 | 46 – 56 |
| CR4 | 1.60 – 2.00 | 180 – 260 | 320 – 410 | 38 – 44 | 48 – 58 |
| CR4 | 2.10 – 3.00 | 170 – 250 | 310 – 400 | 40 – 46 | 46 – 56 |
| CR4 | 3.10 – 4.00 | 160 – 240 | 300 – 390 | 42 – 48 | 44 – 54 |
| CR4 | 4.10 – 6.00 | 150 – 230 | 290 – 380 | 44 – 50 | 42 – 52 |
| CR5 | 1.60 – 2.00 | 160 – 220 | 300 – 380 | 40 – 46 | 42 – 52 |
| CR5 | 2.10 – 3.00 | 150 – 210 | 270 – 370 | 42 – 48 | 40 – 50 |
| CR5 | 3.10 – 4.00 | 140 – 200 | 280 – 360 | 44 – 50 | 38 – 48 |
| CR5 | 4.10 – 6.00 | 130 – 190 | 270 – 350 | 46 – 52 | 36 – 46 |
All values are typical and for reference only.
Chemical Composition (HRPO)
6 GRADES · 7 PARAMETERS
+
| Grade | C (%) Max | Mn (%) Max | S (%) Max | P (%) Max | Si | Al (%) | N (%) Max |
|---|---|---|---|---|---|---|---|
| CR0 | 0.25 | 1.70 | 0.045 | 0.05 | — | — | 0.007 |
| CR1 | 0.15 | 0.60 | 0.04 | 0.04 | — | 0.02 – 0.07 | 0.007 |
| CR2 | 0.12 | 0.50 | 0.035 | 0.035 | — | — | 0.007 |
| CR3 | 0.10 | 0.45 | 0.03 | 0.030 | — | 0.02 min | 0.007 |
| CR4 | 0.08 | 0.40 | 0.025 | 0.025 | — | 0.02 min | 0.007 |
| CR5 | 0.04 | 0.25 | 0.020 | 0.020 | — | — | 0.007 |
All values are typical and for reference only. CR5 micro-alloying: Ti/Nb 0.15% max.
Company Overview
Steelco Gujarat Limited (SGL) is a leading steel manufacturing company with over three decades of industry expertise, specializing in Cold Rolled (CR), Galvanized (GP/GC), and Colour Coated Steel products. Equipped with integrated facilities at Palej, Gujarat, we deliver high-performance steel solutions to diverse industries across India and international markets.
Market
BSE 500399CIN L27110GJ1989PLC011748
Capacity
400,000MTPA
Connectivity
Delhi–Mumbai Expressway
Palej, Bharuch
By road
Vadodara50 km
Surat90 km
Mumbai360 km
Gujarat, India
Ports
Dahej70 km
Hazira113 km
Mumbai380 km
Vision
Vision
To be a trusted and preferred steel manufacturing partner through quality, innovation and ethical business practices.
Mission
Mission
To achieve operational excellence by delivering superior steel products, fostering safe and sustainable work practices, and continuously enhancing customer satisfaction.
Values
Values
The company’s work is guided by six core values. The first is integrity at all times, paired with a commitment to satisfying both internal and external customer needs.
These extend to all-round excellence in health, safety and environment (HSE), a sustained focus on cost reduction, the pursuit of growth through new technology, and consistent quality delivered with an innovative product range and on-time dispatch.
Our Journey
1997
Continuous Hot Dip Galvanising Line
As part of its forward integration strategy, the Company commissioned a Hot Dip Galvanizing Line capable of processing steel up to 1,050 mm in width, enhancing its portfolio of value-added products and strengthening downstream capabilities.
Hover a piece · tap to explore